Guide & documentation
Find all our guides, technical manuals, assembly instructions and useful documents here.
What is Pump-Jack?
The Pump-Jack is neither a gas pump nor a fitness tool, it is actually a very ingenious type of modular aluminum scaffolding.
Designed for work at height, a Pump-Jack system consists of vertical aluminum posts and a work platform that can be raised or lowered along these posts using a pump jack mechanism.
Pump-Jack System Installation
Instructions
Installing a Pump-Jack scaffolding system based on aluminum poles and walkways is a safe and effective alternative for accessing areas at height. As always, follow the manufacturer's instructions specific to your system and comply with local safety regulations when installing and using the scaffolding. Worker safety must be a top priority.
The Pump-Jack system and the CNESST
A fall of a few meters, a tipping scaffold or a defective component can cause serious injuries, work stoppages and CNESST fines.
Now let’s see how to remain 100% compliant with CNESST guidelines.
Our Resource Center
Download what interests you
Get free access to our exclusive resources. Simply enter your email address to instantly access your download.
Frequently Asked Questions
This FAQ answers the most common questions regarding its use, installation, and maintenance.
The maximum height recommended by the manufacturer is 50 feet
Most of our aluminum walkways have a maximum load of 500 lbs.
Weight varies depending on the size of the bridge. We have several sizes available.
- 20 po x 20 pi = 99 lbs
- 20 po x 24 pi = 119 lbs
- 20 po x 32 pi = 169 lbs
A pump jack system works using a lifting mechanism operated by a crank. The poles are attached to the building structure, then the platforms are installed on the poles. By operating the crank, the platforms are raised or lowered, allowing workers to safely reach different heights.
When using pump jack systems, it is essential to follow the safety standards of the CNESST (Commission des normes, de l'équité, de la santé et de la sécurité du travail) and OSHA (Occupational Safety and Health Administration). This includes regular inspections, worker training, the use of fall protection devices, and following the manufacturer's instructions. You can learn more about CNESST regulations by visiting our blog:Regulation CNESST.
With a little practice, it's entirely possible to install a pump jack system alone, even at a height of two stories. One of the major advantages of pump jack systems is that all the materials are raised at the same time as the system. Therefore, even for one person working alone, this system is much faster to raise with the materials than traditional scaffolding. However, it's always important to follow safety standards and manufacturer's recommendations to ensure safe use.
Yes, it is strongly recommended that you install a safety harness when using a pump jack system, especially if you are working at a significant height. A safety harness provides additional protection against falls and is an essential safety measure.